Specifications

ethernet cfm mep
588
ethernet cfm mep
Sets a MEP used by the CFM functionality.
Syntax
To set information:
ethernet cfm mep level <Level> ma <No.> mep-id <MEPID> [{down | up}]
To delete information:
no ethernet cfm mep level <Level> ma <No.> mep-id <MEPID>
Input mode
(config-if)
Parameters
level <Level>
Specifies the domain level that has been set by using the ethernet cfm domain
command.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
0 to 7
ma <No.>
Specifies an MA ID number that has been set by using the ma name command or the
ma vlan-group command.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
0 to 65535
mep-id <MEPID>
Sets the MEP ID.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
1 to 8191
3. Note on using this parameter:
Set a value unique within the MA.
{down | up}
Specifies the direction of a domain.
down
Sets the MEP as Down MEP so that the line side will be maintained.
up
Sets the MEP as Up MEP so that the relay side (toward the switch) will be
maintained.
1. Default value when this parameter is omitted: