Specifications

ethernet cfm cc alarm-priority
574
ethernet cfm cc alarm-priority
Sets the failure level to be detected by CC.
Failure levels equal to or higher than the parameter you set are detected.
Syntax
To set or change information:
ethernet cfm cc level <Level> ma <No.> alarm-priority <Priority>
To delete information:
no ethernet cfm cc level <Level> ma <No.> alarm-priority
Input mode
(config)
Parameters
level <Level>
Specifies the domain level that has been set by using the ethernet cfm domain
command.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
0 to 7
ma <No.>
Sets the MA ID number set by using the ma command. Even if the ma name command
is used to specify the MA name, using a character string, or a VLAN ID, this
parameter specifies the MA ID number.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
0 to 65535
alarm-priority <Priority>
Sets the lowest failure level that will be detected by CC.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
0 to 5
The following table shows levels detected by CC and failure descriptions.
Table 31-1 Levels detected by CC and failures descriptions
Setting
level
Failure type Command
display
Failure description
5 DefXconCCM OtherCCM A CCM with a different domain and MA was
received.