Specifications

radius-server timeout
34
radius-server timeout
Configures the default response timeout value for the general RADIUS server used for
authentication or for an authentication-specific RADIS server.
Syntax
To set or change information:
radius-server timeout <Seconds>
To delete information:
no radius-server timeout
Input mode
(config)
Parameters
<Seconds>
Specifies the timeout period for a response from the RADIUS server.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
1 to 30 (seconds)
Default behavior
The default response timeout value for the RADIUS server is 5 seconds.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. The timeout configurations of radius-server host, dot1x radius-server host,
mac-authentication radius-server host, and web-authentication
radius-server host have precedence over this configuration.
Related commands
aaa authentication
dot1x radius-server host
mac-authentication radius-server host
radius-server host
radius-serve key
radius-server retransmit
web-authentication radius-server host