Specifications

domain name
572
domain name
Sets the name used for the applicable domain.
Syntax
To set or change information:
domain name {no-present | str <Strings> | dns <Name> | mac <MAC> <ID>}
To delete information:
no domain name
Input mode
(config-ether-cfm)
Parameters
{no-present | str <Strings> | dns <Name> | mac <MAC> <ID>}
Sets the parameter to be used as the domain name.
no-present
If this parameter is set, the Maintenance Domain Name field in CCM is not
used.
str <Strings>
Use a character string that is no more than 43 characters to set a domain
name.
dns <Name>
Uses the domain name server name as the domain name.
mac <MAC> <ID>
Uses the MAC address and a 2-byte ID as a domain name.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
Specify a character string that is no more than 43 characters for <Strings>. For
details about the characters that can be specified, see Specifiable values for
parameters.
Specify a character string that is no more than 63 characters for <Name>. For
details about the characters that can be specified, see Specifiable values for
parameters.
Specify a value from
0000.0000.0000 to feff.ffff.ffff for <Mac>. Note,
however, that a multicast MAC address (for which the least significant bit of
the first byte is set to 1) cannot be set.
Specify a value from
0 to 65535 for <ID>.
Default behavior
no-present is set.
Impact on communication
None