Specifications

radius-server retransmit
33
radius-server retransmit
Configures the default number of times an authentication request is resent to the general
RADIUS server used for authentication or to an authentication-specific RADIUS server.
Syntax
To set or change information:
radius-server retransmit <Retries>
To delete information:
no radius-server retransmit
Input mode
(config)
Parameters
<Retries>
Specifies the number of times an authentication request is resent to the RADIUS
server.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
0 to 15 (times)
Default behavior
The default value for the number of times an authentication request is retransmitted to a
RADIUS server is 3.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. The retransmit configurations of radius-server host, dot1x radius-server
host, mac-authentication radius-server host, and web-authentication
radius-server host have precedence over this configuration.
Related commands
aaa authentication
dot1x radius-server host
mac-authentication radius-server host
radius-server host
radius-server key
radius-server timeout
web-authentication radius-server host