Specifications

efmoam disable
555
efmoam disable
Enables or disables the IEEE 802.3ah/OAM functionality on a switch.
To disable the IEEE 802.3ah/OAM functionality, set the
efmoam disable command.
To enable the IEEE 802.3ah/OAM functionality again, set the
no efmoam disable
command.
In passive mode, the send process starts when an OAMPDU from the active mode is
received.
Syntax
To set information:
efmoam disable
To delete information:
no efmoam disable
Input mode
(config)
Parameters
None
Default behavior
The IEEE 802.3ah/OAM functionality operates.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
None