Specifications

http-server [OP-WOL]
542
http-server [OP-WOL]
Enables the HTTP server functionality.
Syntax
To set information:
http-server
To delete information:
no http-server
Input mode
(config)
Parameters
None
Default behavior
When the web-authentication system-auth-control command is set: Enabled
When the
web-authentication system-auth-control command is not set: Disabled
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. When this command has been set, display of the Secure Wake-on-LAN user
authentication screen and Web authentication Login page can be enabled.
2. When the
web-authentication system-auth-control command has been set,
display of the Secure Wake-on-LAN user authentication screen and Web
authentication Login page can be enabled.
3. When the
web-authentication system-auth-control command has been set,
operation of the Web authentication functionality is also enabled. Therefore, when
using the Secure Wake-on-LAN user authentication screen only, set the
http-server command.
4. If both this command and the
web-authentication system-auth-control
command have been set, operation of the Secure Wake-on-LAN functionality is not
affected. The following table explains the combinations of command settings.
Configuration settings Secure Wake-on-LAN Web Authentication
http-server web-authenticati
on
system-auth-co
ntrol
User
authenticatio
n screen
Functionality Login page Functionality
Not set Not set Not displayed. Does not Not displayed. Does not