Specifications

mac-authentication system-auth-control
529
mac-authentication system-auth-control
Enables MAC-based authentication.
Note that if the
no mac-authentication system-auth-control command is executed,
MAC-based authentication stops.
Syntax
To set information:
mac-authentication system-auth-control
To delete information:
no mac-authentication system-auth-control
Input mode
(config)
Parameters
None
Default behavior
MAC-based authentication is not performed.
Impact on communication
If no mac-authentication system-auth-control is executed, the authentication of the
authenticated terminals is canceled.
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. See Table 24-1 Configuration commands and MAC-based authentication modes for
the authentication mode in which the command's settings are operable.
2. If
no mac-authentication system-auth-control is executed, terminal
information registered in the internal MAC-based authentication database is saved in
its current state.
Related commands
None