Specifications

mac-authentication static-vlan force-authorized
522
- mac-authentication authentication
#3
#1
Specify the same Ethernet port.
- The following accounting log data is collected when an authentication
request is sent to the RADIUS server:
No=21:
NOTICE:LOGIN:
(<Additional information>) Login failed ;
Failed to connection to RADIUS server.
<Additional information>:
MAC, PORT, VLAN
The accounting log data can be confirmed by using the
show
mac-authentication logging operation command.
#2
When forced authentication is used as the Switch default, set only
default
group radius
.
#3
When forced authentication is used for the port-based authentication method,
set
aaa authentication mac-authentication <List name>.
5. The forced authentication authorization state is canceled if authentication for the
applicable terminal is canceled.
6. Before issuing private traps, you must use the
snmp-server host command to set
the destination IP address for traps and
mac-authentication.
7. If either of the following commands has already been set, this command cannot be
set:
 authentication force-authorized enable
 authentication force-authorized vlan
Related commands
aaa authentication mac-authentication
mac-authentication port
mac-authentication system-auth-control
radius-server host or mac-authentication radius-server host
snmp-server host