Specifications

aaa accounting mac-authentication
490
aaa accounting mac-authentication
Sends accounting information for MAC-based authentication to an accounting server.
Syntax
To set information:
aaa accounting mac-authentication default start-stop group radius
To delete information:
no aaa accounting mac-authentication default
Input mode
(config)
Parameters
default
Sets the default accounting method of a Switch.
start-stop
If authentication is successful, an accounting start notification message is sent to the
accounting server. If authentication is canceled, an accounting stop notification
message is sent to the accounting server.
group radius
The RADIUS server is used as the accounting server.
Default behavior
A notification is not sent to the accounting server.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. All MAC-based authentication settings take effect when the mac-authentication
system-auth-control
command is set.
2. See Table 24-1 Configuration commands and MAC-based authentication modes for
the authentication mode in which the command's settings are operable.
Related commands
aaa authentication mac-authentication
mac-authentication system-auth-control
radius-server host or mac-authentication radius-server host