Specifications

network
484
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. When this command is set, all IP addresses excluding those in which the bits in the
host part of the target subnet are all 1s or all 0s are secured as the IP address pool.
Therefore, designate IP addresses that should not be distributed in advance by
using the
ip dhcp excluded-address command.
2. Because a maximum of 32 subnets can be handled by the DHCP server of a Switch,
you cannot create more than 32 pools that include
network settings.
Related commands
ip dhcp excluded-address
ip dhcp pool