Specifications

lease
479
lease
Sets the default lease time of the IP addresses distributed to clients.
Syntax
To set or change information:
lease {<Time day> [<Time hour> [<Time min> [<Time sec>]]] | infinite}
To delete information:
no lease
Input mode
(dhcp-config)
Parameters
{<Time day> [<Time hour> [<Time min> [<Time sec>]]] | infinite}
Specify the lease time in days, hours, minutes, and seconds. If this information is not
set, 10 seconds is set as the initial value for the lease time. This information cannot
be set if the total value of <Time day>
/<Time hour>/<Time min>/<Time sec> is
less than 10 seconds. Specify a value from 10 (seconds) to 365 (days).
<Time day>
Specify the lease time in days.
1. Range of values:
0 to 365 (days)
<Time hour>
Specify the lease time in hours.
1. Range of values:
0 to 23 (hours)
<Time min>
Specify the lease time in minutes.
1. Range of values:
0 to 59 (minutes)
<Time sec>
Specify the lease time in seconds.
1. Range of values:
0 to 59 (seconds)
infinite
Sets the lease time to unlimited.
Default behavior
10 seconds is set as the lease time.
Impact on communication
None