Specifications

web-authentication static-vlan max-user
461
web-authentication static-vlan max-user
Sets the maximum number of users that can be authenticated on a Switch.
Syntax
To set or change information:
web-authentication static-vlan max-user <Count>
To delete information:
no web-authentication static-vlan max-user
Input mode
(config)
Parameters
<Count>
Sets the maximum number of users that can be authenticated on a Switch on which
user authentication is performed.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
1 to 1024
Default behavior
The maximum number of users that can be authenticated on a Switch is 1024.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. All Web authentication settings take effect when the web-authentication
system-auth-control command is set.
2. See Table 23-1 Configuration commands and Web authentication modes for the
authentication mode in which the command's settings are operable.
3. When this command is set, the setting is not applied to users that have already been
authenticated, and takes effect only from the next login.
4. The maximum number of users that can be authenticated on a Switch and a port can
be set at the same time.
 If the number of authenticated users reaches the maximum number for a port,
no more new users can be authenticated on that port.
 If the number of authenticated users reaches the maximum number for a
Switch, no more new users can be authenticated on that Switch.
5. If the maximum number of users that can be authenticated is changed so that it is
less than the number of users currently authenticated, communication by the current
authenticated users can continue, but new users cannot be authenticated.