Specifications

web-authentication static-vlan force-authorized
460
- web-authentication authentication
#3
#1
Specify the same Ethernet port.
- The following accounting log data is collected when an authentication
request is sent to the RADIUS server:
No=21:
NOTICE:LOGIN:(additional information) Login failed ; Failed to
connection to RADIUS server.
Additional information:MAC, USER, IP, PORT, VLAN
Check the account log with the show web-authentication logging
operation command.
#2
When forced authentication is used as the Switch default, set only
default
group radius.
#3
Set
aaa authentication web-authentication <List name> for forced
authentication that uses the port-based authentication method.
5. The authorized forced authentication state is canceled if the applicable user logs out.
6. When private traps are issued, use the
snmp-server host command to set the
destination IP address for traps and
web-authentication.
7. If either of the following commands has already been set, this command cannot be
set:
 authentication force-authorized enable
 authentication force-authorized vlan
Related commands
aaa authentication web-authentication
radius-server host or web-authentication radius-server host
snmp-server host
web-authentication port
web-authentication system-auth-control