Specifications

web-authentication redirect enable
454
web-authentication redirect enable
The no web-authentication redirect enable command disables the URL redirect
functionality.
Syntax
To set information:
no web-authentication redirect enable
To delete information:
web-authentication redirect enable
Input mode
(config)
Parameters
None
Default behavior
The URL redirect functionality is enabled.
Impact on communication
After the no web-authentication redirect enable command has been set, the URL
redirect functionality does not operate.
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. All Web authentication settings take effect when the web-authentication
system-auth-control command is set.
2. See Table 23-1 Configuration commands and Web authentication modes for the
authentication mode in which the command's settings are operable.
Related commands
web-authentication system-auth-control
web-authentication port
authentication ip access-group
authentication arp-relay