Specifications

web-authentication radius-server host
450
web-authentication radius-server host
Configures the RADIUS server used for Web authentication.
Syntax
To set or change information:
web-authentication radius-server host <IP address> [auth-port <Port>]
[acct-port <Port>] [timeout <Seconds>] [retransmit <Retries>] [key
<String>]
To delete information:
no web-authentication radius-server host <IP address>
Input mode
(config)
Parameters
<IP address>
Specifies the IPv4 address of the RADIUS server.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
Specify the IPv4 address (dot notation).
1.0.0.0 to 126.255.255.255, 128.0.0.0 to 223.255.255.255
auth-port <port>
Specifies the RADIUS server port number.
1. Default value when this parameter is omitted:
Port number 1812 is used.
2. Range of values:
1 to 65535
acct-port <Port>
Specifies the port number for RADIUS server accounting.
1. Default value when this parameter is omitted:
Port number 1813 is used.
2. Range of values:
1 to 65535
timeout <Seconds>
Specifies the timeout period (in seconds) for a response from the RADIUS server.
1. Default value when this parameter is omitted:
The period of time set by using the
radius-server timeout command is
used. If no period is set, the initial value is 5.
2. Range of values:
1 to 30 (seconds)