Specifications

web-authentication port
447
web-authentication port
Sets the authentication mode for ports.
Syntax
To set information:
web-authentication port
To delete information:
no web-authentication port
Input mode
(config-if)
Parameters
None
Default behavior
When Web authentication is valid, the port operates in legacy mode.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. All Web authentication settings take effect when the web-authentication
system-auth-control command is set.
2. See Table 23-1 Configuration commands and Web authentication modes for the
authentication mode in which the command's settings are operable.
3. This command cannot be set if the
system function command is set and
extended-authentication has not been set. (This command can be set if the
system function command has not been set.) [AX1250S] [AX1240S]
4. This command can be set only for Ethernet interfaces.
Related commands
web-authentication html-fileset
web-authentication system-auth-control
authentication ip access-group
authentication arp-relay