Specifications

aaa group server radius
20
aaa group server radius
Configures a RADIUS server group. Entering this command switches to config-group mode
in which the RADIUS server group information can be set.
Syntax
To set or change information:
aaa group server radius <Group name>
To delete information:
no aaa group server radius <Group name>
Input mode
(config)
Parameters
<Group name>
Configures the RADIUS server group name.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
Specify a character string that is no more than 32 characters. For details about
the characters that can be specified, see Specifiable values for parameters.
We recommend that you use an upper-case letter for the first character.
However, you cannot use the following character strings:
radius or a character string beginning with radius
tacacs+ or a character string beginning with tacacs+
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. If a valid RADIUS server is not set for the RADIUS server group, the server will not
operate.
2. A maximum of four RAIDUS server groups can be set.
Related commands
aaa authentication
dot1x authentication
mac-authentication authentication
web-authentication authentication
web-authentication user-group