Specifications

web-authentication html-fileset
426
web-authentication html-fileset
Sets a custom file name for the Web authentication page displayed for each port.
Syntax
To set or change information:
web-authentication html-fileset <Name>
To delete information:
no web-authentication html-fileset
Input mode
(config-if)
Parameters
<Name>
Specify the custom file set name registered on the Switch by using the
set
web-authentication html-files operation command.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
Specify a character string that has no more than 16 characters. Specifiable
characters are upper-case and numeric characters.
Default behavior
The basic Web authentication page is displayed when a user logs in.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. All Web authentication settings take effect when the web-authentication
system-auth-control command is set.
2. See Table 23-1 Configuration commands and Web authentication modes for the
authentication mode in which the command's settings are operable.
3. To set this command, set the
web-authentication port command for the
applicable port in advance.
4. This command can be set only for Ethernet interfaces.
Related commands
web-authentication port
web-authentication system-auth-control