Specifications

aaa authentication web-authentication end-by-reject
419
aaa authentication web-authentication end-by-reject
Terminates authentication if login authentication is denied. If authentication fails due to a
communication not being possible, such as an unresponsive RADIUS server, the next
authentication method specified by the
aaa authentication web-authentication
command is used to perform authentication.
Syntax
To set information:
aaa authentication web-authentication end-by-reject
To delete information:
no aaa authentication web-authentication end-by-reject
Input mode
(config)
Parameters
None
Default behavior
If authentication fails, regardless of the reason for failure, the next authentication method
specified by the
aaa authentication web-authentication command is used to perform
authentication.
Impact on communication
Authentication of terminals authenticated by the Web authentication functionality is
canceled.
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. See Table 23-1 Configuration commands and Web authentication modes for the
authentication mode in which the command's settings are operable.
2. This command is only valid for authentication methods specified by the
aaa
authentication web-authentication command.
Related commands
aaa authentication web-authentication