Specifications

aaa authentication web-authentication
418
group <Group Name>
Web authentication is performed by a RADIUS server. The RADIUS server to use is
a RADIUS server group. Specify the group name set by the
aaa group server
radius command.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
Specify a character string that has no more than 32 characters. For details
about the characters that can be specified, see Specifiable values for
parameters.
Default behavior
User authentication is performed by using the internal Web authentication database
instead of using the RADIUS server.
Impact on communication
When the Switch default is changed, authentication of the terminals authenticated by using
the Switch default authentication method is canceled.
When the authentication method list is changed, authentication of terminals authenticated
by the corresponding authentication method list is canceled.
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. All Web authentication settings take effect when the web-authentication
system-auth-control command is set.
2. See Table 23-1 Configuration commands and Web authentication modes for the
authentication mode in which the command's settings are operable.
3. Enabling of this command requires a separate authentication setting for the RADIUS
server.
4. The forced authentication functionality for Web authentication operates when only
RADIUS authentication is set. If multiple authentication methods are set, the forced
authentication functionality does not operate.
Related commands
aaa authentication web-authentication end-by-reject
aaa group server radius
radius-server host or web-authentication radius-server host
web-authentication system-auth-control
web-authentication user-group
web-authentication authentication