Specifications

dot1x vlan dynamic radius-vlan
400
dot1x vlan dynamic radius-vlan
Specifies VLANs to allow dynamic VLAN allocation according to VLAN information sent
from the RADIUS server during IEEE 802.1X authentication.
Syntax
To set information:
dot1x vlan dynamic radius-vlan <VLAN ID list>
To change information:
dot1x vlan dynamic radius-vlan {<VLAN ID list> | add <VLAN ID list> | remove
<VLAN ID list>}
To delete information:
no dot1x vlan dynamic radius-vlan
Input mode
(config)
Parameters
<VLAN ID list>
Specifies the IDs of VLANs to which the IEEE 802.1X authentication settings are
applied. Changing the parameter replaces the existing VLANs with the VLANs that
have been specified. VLANs that have not been set for the Switch cannot be
specified.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
For details about how to specify <VLAN ID List> and the specifiable range of
values, see Specifiable values for parameters. Note that the default VLAN
(VLAN ID = 1) cannot be specified for this command.
add <VLAN ID list>
Specifies VLANs to be added to the VLANs to which the IEEE 802.1X authentication
settings are applied. VLANs that have not been set for the Switch cannot be
specified.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
For details about how to specify <VLAN ID List> and the specifiable range of
values, see Specifiable values for parameters. Note that the default VLAN
(VLAN ID = 1) cannot be specified for this command.
remove <VLAN ID list>
Specifies VLANs to be removed from the VLANs to which the IEEE 802.1X
authentication settings are applied. VLANs that have not been set for the Switch
cannot be specified.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
For details about how to specify <VLAN ID List> and the specifiable range of