Specifications

dot1x vlan dynamic enable
397
dot1x vlan dynamic enable
Enables IEEE 802.1X VLAN-based authentication (dynamic).
Syntax
To set information:
dot1x vlan dynamic enable
To delete information:
no dot1x vlan dynamic enable
Input mode
(config)
Parameters
None
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. All IEEE 802.1X settings take effect when the dot1x system-auth-control
command is set.
2. See Table 22-1 Configuration commands and IEEE 802.1X authentication modes for
the authentication mode in which the command's settings are operable.
3. When you set the
dot1x vlan dynamic enable command, it will take effect only if
you also set the
aaa authorization network default group radius command.
4. When this command has not been set, none of the VLAN-based authentication
(dynamic) functionality is enabled.
5. If at least one of the following commands is set for a Switch, this command cannot be
set:

authentication multi-step

dot1x authentication

mac-authentication authentication

web-authentication authentication

web-authentication user-group
Related commands
dot1x system-auth-control
aaa authorization network default