Specifications

dot1x supplicant-detection
387
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. All IEEE 802.1X settings take effect when the dot1x system-auth-control
command is set.
2. See Table 22-1 Configuration commands and IEEE 802.1X authentication modes for
the authentication mode in which the command's settings are operable.
3. This command takes effect only if the
dot1x port-control command has been set.
4. This command takes effect only if the
dot1x multiple-authentication command
has been set.
5.
disable cannot be set for the dot1x supplicant-detection command on an
interface on which the
dot1x ignore-eapol-start command has been set.
Related commands
dot1x ignore-eapol-start
dot1x multiple-authentication
dot1x system-auth-control
dot1x port-control