Specifications

dot1x radius-server host
384
server is used as the initial current server (the destination for RADIUS authentication
requests during operation).
If a failure occurs on the primary IEEE 802.1X authentication RADIUS server, the
current server switches to the next effective IEEE 802.1X authentication RADIUS
server (the secondary RADIUS server). For details about automatic restoration of
the primary IEEE 802.1X authentication RADIUS server, see the description of the
dot1x radius-server dead-interval command.
8. If a RADIUS server with an IP address that matches has already been registered in
the general-use RADIUS server configuration, other authentication-specific RADIUS
server configuration, or the RADIUS server group configuration, all these
parameters are replaced by the new commands that were entered automatically.
Related commands
aaa authentication dot1x
dot1x port-control
dot1x system-auth-control