Specifications

dot1x force-authorized
369
request is sent to the RADIUS server:
No.=82
WARNING:SYSTEM: (<Additional information>)
Failed to connect
to RADIUS server.
<Additional information>:IP
You can use the
show dot1x logging command to check the
accounting log.
#2
When forced authentication is used as the Switch default, set
default group
radius.
#3
When forced authentication is used as the authentication method by port, set
aaa authentication dot1x <List name>.
5. The forced authentication authorization state is canceled if authentication for the
applicable terminal is canceled.
6. If either of the following commands has already been set, this command cannot be
set:
 authentication force-authorized enable
 authentication force-authorized vlan
Related commands
aaa authentication dot1x
dot1x port-control
dot1x system-auth-control
switchport mode
radius-server host or dot1x radius-server host