Specifications

aaa authentication dot1x
362
aaa authentication dot1x
Sets an IEEE 802.1X authentication method group.
If
default is set, one entry can be set. If an authentication method list name is specified, a
maximum of four entries can be set.
Syntax
To set or change information:
aaa authentication dot1x default <Method>
aaa authentication dot1x
<List name> group <Group name>
To delete information:
no aaa authentication dot1x {default | <List name>}
Input mode
(config)
Parameters
default <Method>
Sets the default authentication method of a Switch. For <Method>, specify group
radius
.
group radius
IEEE 802.1X authentication is performed by a RADIUS server. The RADIUS
server that can be used is an IEEE 802.1X RADIUS server or a general-use
RADIUS server.
<List name>
Sets the name of an authentication method list.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
Specify a character string that has no more than 32 characters. For details
about the characters that can be specified, see Specifiable values for
parameters.
We recommend that you use an upper-case letter for the first character.
However, you cannot use the following character strings:
- At mark (
@)
-
default or a character string beginning with default
group <Group Name>
IEEE 802.1X authentication is performed by a RADIUS server. The RADIUS server
to use is a RADIUS server group. Specify the RADIUS server group name set by the
aaa group server radius command.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
Specify a character string that has no more than 32 characters. For details
about the characters that can be specified, see Specifiable values for
parameters.