Specifications

aaa accounting dot1x
361
aaa accounting dot1x
Sends IEEE 802.1X accounting information to the accounting server.
Syntax
To set information:
aaa accounting dot1x default start-stop group radius
To delete information:
no aaa accounting dot1x default
Input mode
(config)
Parameters
default
Sets the default accounting method of a Switch.
start-stop
If authentication is successful, the accounting start notification is sent to the
accounting server. If authentication is canceled, the accounting stop notification is
sent to the accounting server.
group radius
The RADIUS server is used as the accounting server.
Default behavior
A notification is not sent to the accounting server.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. All IEEE 802.1X settings take effect when the dot1x system-auth-control
command is set.
2. See Table 22-1 Configuration commands and IEEE 802.1X authentication modes for
the authentication mode in which the command's settings are operable.
Related commands
aaa authentication dot1x
dot1x system-auth-control
radius-server host or dot1x radius-server host