Specifications

authentication ip access-group
356
 mac-authentication port
3. When you use authentication IPv4 access list for IEEE 802.1X port-based
authentication (static), note the following:
 This command cannot be set if the
system function command is set and
extended-authentication has not been set. (This command can be set if
the
system function command has not been set.) [AX1250S] [AX1240S]
4. Interfaces that can be set for this command vary depending on the authentication
functionality.
 IEEE 802.1X port-based authentication (static) can be set for Ethernet
interfaces and port channel interfaces.
 IEEE 802.1X port-based authentication (dynamic), Web authentication, and
MAC-based authentication can be set only for Ethernet interfaces.
Related commands
dot1x system-auth-control
dot1x port-control
web-authentication system-auth-control
web-authentication port
web-authentication redirect enable
mac-authentication system-auth-control
mac-authentication port
ip access-list extended