Specifications

qos (ip qos-flow-list)
335
Specify 0 to 7 in decimal.
replace-user-priority <Priority>
Specifies the value for rewriting the user priority.
The user priority of the received packet is replaced with the specified <Priority>
value.
1. Default value when this parameter is omitted:
None. (The user priority is not replaced.)
2. Range of values:
Specify 0 to 7 in decimal.
replace-dscp <DSCP>
Specifies the value for rewriting DSCP.
The DSCP field of the received packet is replaced with the specified <DSCP> value.
1. Default value when this parameter is omitted:
None. (The DSCP value is not replaced.)
2. Range of values:
Specify 0 to 63 (in decimal) or the DSCP name.
For details about the DSCP names that can be set, see Table 20-6 DSCP
names that can be specified.
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. When 255.255.255.255 is entered for the source address wildcard and the
destination address wildcard,
any is displayed.
2. If
nnn.nnn.nnn.nnn 0.0.0.0 is entered as the source address and the destination
address,
host nnn.nnn.nnn.nnn is displayed.
3.
tos, precedence, and dscp cannot be set at the same time.
4. When
cos and replace-user-priority are set for the action parameter at the
same time, the user priority is replaced with the value set for
cos.
Related commands
ip qos-flow-list
ip qos-flow-group
ip qos-flow-list resequence
remark