Specifications

qos (ip qos-flow-list)
334
syn
Specifies the detection of packets whose SYN flag in the TCP header is 1.
This parameter option is available only when the protocol is TCP.
1. Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
2. Range of values:
None
urg
Specifies the detection of packets whose URG flag in the TCP header is 1.
This parameter option is available only when the protocol is TCP.
1. Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
2. Range of values:
None
vlan <VLAN ID>
Specifies a VLAN ID.
This parameter has an effect only when it is applied to an Ethernet interface.
1. Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
2. Range of values:
See Specifiable values for parameters.
user-priority <Priority>
Specifies the user priority.
1. Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
2. Range of values:
Specify 0 to 7 in decimal.
Action parameters
action
To set or change an action parameter, you must set the
action parameter keyword
at the beginning of the action parameters.
1. Default value when this parameter is omitted:
None. (This
action parameter keyword cannot be omitted if an action is set.)
2. Range of values:
None
cos <COS>
Specifies an index (CoS) indicating the priority on a Switch.
1. Default value when this parameter is omitted:
The default COS values are set. For details about the default COS values, see
3.7.1 COS values in the Configuration Guide Vol. 2.
2. Range of values: