Specifications

qos (ip qos-flow-list)
332
For <Dst IPv4 wildcard>, specify a wildcard in IPv4 address format that sets
bits that permit an arbitrary value in an IPv4 address.
-
host <Dst IPv4> specification:
The flow detection condition is a perfect match of <Dst IPv4>.
-
any specification:
The destination IPv4 address is not included as a flow detection condition.
IPv4 address (nnn.nnn.nnn.nnn): 0.0.0.0 to 255.255.255.255
eq <Dst Port>
Specifies the destination port number.
This parameter option is available only when the protocol is TCP or UDP.
1. Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
2. Range of values:
Specify 0 to 65535 (in decimal) or a port name.
For details about the port names that can be specified, see Table 20-2 Port
names that can be specified for TCP and Table 20-3 Port names that can be
specified for UDP (IPv4).
tos <TOS>
Specifies four bits (bits 3 to 6) in the TOS field as the TOS value.
This value is compared with four bits (bits 3 to 6) in the TOS field of the sent or
received packet.
1. Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
2. Range of values:
Specify 0 to 15 (in decimal) or a TOS name.
For details about the TOS names that can be set, see Table 20-4 TOS names
that can be specified.
precedence <Precedence>
Specifies the Precedence value, which is the first three bits in the TOS field.
This value is compared with the first three bits in the TOS field of the sent or received
packet.
1. Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
2. Range of values:
Specify 0 to 7 (in decimal) or the Precedence name.
For details about the Precedence names that can be set, see Table 20-5
Precedence names that can be specified.