Specifications

mac qos-flow-list resequence
328
mac qos-flow-list resequence
Resets the sequence numbers of the application sequence in the MAC QoS flow list.
Syntax
To set or change information:
mac qos-flow-list resequence <QoS flow list name> [<Starting seq>
[<Increment seq>] ]
Input mode
(config-mac-qos)
Parameters
<QoS flow list name>
Specifies the MAC QoS flow list name to be changed.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
This name can be 3 to 31 characters. For details about the characters that can
be specified, see Specifiable values for parameters.
<Starting seq>
Specifies the starting sequence number.
1. Default value when this parameter is omitted:
The initial value is 10.
2. Range of values:
Specify 1 to 4294967295 in decimal.
<Increment seq>
Specifies the increment value for the sequence.
1. Default value when this parameter is omitted:
The initial value is 10.
2. Range of values:
Specify 1 to 100 in decimal.
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None