Specifications

mac qos-flow-list
327
mac qos-flow-list
Creates a MAC QoS flow list used to set QoS flow detection and action specifications. A
maximum of 512 IPv4 and MAC QoS flow lists can be created for a Switch. A maximum of
1024 flow detection and action specification entries can be created.
Syntax
To set or change information:
mac qos-flow-list <QoS flow list name>
To delete information:
no mac qos-flow-list <QoS flow list name>
Input mode
(config)
Parameters
<QoS flow list name>
Specifies the MAC QoS flow list name.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
This name can be 3 to 31 characters. For details about the characters that can
be specified, see Specifiable values for parameters.
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. The names of existing IPv4 QoS flow lists cannot be specified.
Related commands
mac qos-flow-group
mac qos-flow-list resequence
qos (mac qos-flow-list)
remark