Specifications

mac qos-flow-group
326
QoS flow list name is registered.
4. The following table shows flow detection mode that can be set for each interface.
Table 20-10 Specifiable interfaces for each flow detection mode (MAC)
Receiving-side flow detection
mode
Whether the mode can be set
Ethernet VLAN
Layer 2-1 Y Y
Layer 2-2 N N
Legend Y: Can be set; N: Cannot be set
5. If another list has been set for an interface by using this command, no more lists can
be set. Remove the existing list first, and then set another list.
6. When a list is to be applied to an Ethernet interface and a VLAN parameter exists as
a flow detection condition, the list can be set if the VLAN ID is included in settings of
the Ethernet interface.
7. When an MAC QoS flow list is to be applied to a VLAN interface, the list can be set if
no VLAN parameters exist as a flow detection condition.
8. Some packets are not subject to the QoS functionality. For details, see 3. Flow
control in the Configuration Guide Vol. 2.
Related commands
mac qos-flow-list