Specifications

ip qos-flow-list
320
ip qos-flow-list
Creates an IPv4 QoS flow list to be used to set QoS flow detection and action specifications.
A maximum of 512 IPv4 and MAC QoS flow lists can be created for a Switch. A maximum
of 1024 flow detection and action specification entries can be created.
Syntax
To set or change information:
ip qos-flow-list <QoS flow list name>
To delete information:
no ip qos-flow-list <QoS flow list name>
Input mode
(config)
Parameters
<QoS flow list name>
Specifies the IPv4 QoS flow list name.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
This name can be 3 to 31 characters. For details about the characters that can
be specified, see Specifiable values for parameters.
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
The names of existing QoS flow lists cannot be specified.
Related commands
ip qos-flow-group
ip qos-flow-list resequence
qos (ip qos-flow-list)
remark