Specifications

permit (mac access-list extended)
308
{<Dst MAC> <Dst MAC mask> | host <Dst MAC> | any | bpdu | cdp | lacp | lldp
| oadp | pvst-plus-bpdu }
Specifies the destination MAC address.
To specify all destination MAC addresses, specify
any.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
Specify <Dst MAC> <Dst MAC mask>,
host <Dst MAC>, any, bpdu, cdp,
lacp, lldp, oadp,
or pvst-plus-bpdu.
- <Dst MAC> <Dst MAC mask> specification:
Specify the destination MAC address for <Dst MAC>.
- For <Dst MAC mask>, specify a mask in MAC address format that sets
bits that permit an arbitrary value in the MAC address.
host <Dst MAC>
specification:
The filter condition is a perfect match with <Dst MAC>.
-
any specification:
The destination MAC address is not included as a filter condition.
- bpdu specification:
Sets BPDU control packets as a filter condition.
- cdp specification:
Sets CDP control packets as a filter condition.
- lacp specification:
Sets LACP control packets as a filter condition.
- lldp specification:
Sets LLDP control packets as a filter condition.
- oadp specification:
Sets OADP control packets as a filter condition.
pvst-plus-bpdu specification:
Sets PVST+ control packets as a filter condition.
MAC address (nnnn.nnnn.nnnn): 0000.0000.0000 to ffff.ffff.ffff (hexadecimal)
<Ethernet type>
Specifies the Ethernet type number or the Ethernet type name.
1. Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
2. Range of values:
Specify 0x0000 to 0xffff (hexadecimal) or the Ethernet type name.
For details about the Ethernet type names that can be specified, see Table
19-7 Ethernet type names that can be specified.
vlan <VLAN ID>
Specifies a VLAN ID.
This parameter has an effect only when it is applied to an Ethernet interface.
1. Default value when this parameter is omitted: