Specifications

1 Reading the Manual
5
Parameter type Description Input example
Specification of multiple
interfaces
Set the information about multiple interfaces.
You can specify fastethernet, gigabitethernet,
vlan, and port-channel interfaces. However,
you cannot specify both fastethernet and
gigabitethernet.
The following are the input formats:
For fastethernet
interface range fastethernet
<IF# list>
For gigabitethernet
interface range gigabitethernet
<IF# list>
For vlan
interface range vlan <VLAN ID
list>
For port-channel
interface range port-channel
<Channel group# list>
interface range
fastethernet 0/1-3
interface range
gigabitethernet 0/25-26
interface range vlan 1-100
add/remove specification Add to or delete from the information when
multiple interfaces have been specified.
The add specification adds information to the
current information.
The remove specification deletes information
from the current information.
When the add and remove specifications are
used, if the show command displays
duplicated information, delete the duplicated
information to optimize the information.
The following shows an optimization example
of information when multiple interfaces are
specified:
Information before entering a command:
switchport trunk allowed vlan
100,101
Input command:
switchport trunk allowed vlan
add 103
Information after entering a command:
switchport trunk allowed vlan
100,101,103
switchport trunk allowed
vlan add 100,200-210
switchport trunk allowed
vlan remove 100,200-210
switchport isolation
interface add
fastethernet 0/1-3
switchport isolation
interface add
gigabitethernet 0/25-26
switchport isolation
interface remove
fastethernet 0/1-3
switchport isolation
interface remove
gigabitethernet 0/25-26
<IF#> Parameter range
Specify the <IF#> parameter in the format NIF-No./Port-No. (include the last period).
NIF-No. of the Switch is fixed at zero.
The following tables list the range of <IF#> values.
Table 1-3 Range of <IF#> values [AX2200S]
# Model Ethernet type Range of values
1 AX2230S-24T/AX2230S-24P gigabitethernet 0/1 to 0/28