Specifications

1 Reading the Manual
4
Specifiable values for parameters
The following table describes the values that can be specified for parameters. If there are
no limitations on parameter names, see Any character string.
Table 1-2 Specifiable values for parameters
Parameter type Description Input example
Any character string
See List of character codes.
name "PORT BASED VLAN-1"
Access list name
QoS flow list name
See List of character codes.
The first character must be an alphabetical
character. Subsequent characters can be
alphanumeric characters, hyphens (-),
underscores (_), and periods (.).
It is possible to enter other characters, but use
only the characters mentioned above.
In addition, do not specify a character string
beginning with resequence.
mac access-list extended
list101
QoS queue list name
DHCP address pool
name
See List of character codes.
The first character must be an alphabetical
character. Subsequent characters can be
alphanumeric characters, hyphens (-),
underscores (_), and periods (.).
It is possible to enter other characters, but use
only the characters mentioned above.
ip dhcp pool floorA
Host name
The first character must be an alphabetical
character. Subsequent characters can be
alphanumeric characters, hyphens (-), and
periods (.).
domain name dns DNS-1
MAC address,
MAC address mask
Specify these items in hexadecimal format,
separating 2-byte hexadecimal values by
periods (.).
1234.5607.08ef
0000.00ff.ffff
IPv4 address,
IPv4 subnet mask
Specify a 4-byte address in decimal format,
separating 1-byte decimal values by a period
(.).
192.168.0.14
255.255.255.0
IPv4 address wildcard The same input format as IPv4 addresses.
Setting a bit indicates permission.
255.255.0.0
IPv6 address Specify this item in hexadecimal format,
separating 2-byte hexadecimal values by
colons (:).
3ffe:501:811:ff03::87ff:
fed0:c7e0