Specifications

1 Reading the Manual
3
Command mode list
The following table lists the command modes.
Table 1-1 Command mode list
# Command mode
name
Description Command for mode transition
1 (config) Global configuration mode.
> enable
# configure
2 (config-line) Configures remote login.
(config)# line vty
3 (config-group) Configures a RADIUS server group.
(config)# aaa group server
radius
4 (config-if) Configures an interface.
(config)# interface
5 (config-if-range) Configures multiple interfaces.
(config)# interface range
6 (config-vlan) Configures VLAN.
(config)# vlan
7 (config-mst) Configures Multiple Spanning Tree.
(config)# spanning-tree mst
configuration
8 (config-axrp) Configures the Ring Protocol.
(config)# axrp
9 (config-ext-nacl) Configures an IPv4 packet filter.
(config)# ip access-list
extended
10 (config-std-nacl) Configures an IPv4 address filter.
(config)# ip access-list
standard
11 (config-ext-macl) Configures a MAC filter.
(config)# mac access-list
extended
12 (config-ip-qos) Configures IPv4 QoS.
(config)# ip qos-flow-list
13 (config-mac-qos) Configures MAC QoS.
(config)# mac qos-flow-list
14 (dhcp-config) Configuring the DHCP server.
(config)# ip dhcp pool
15 (config-auto-cf) Configures AUTOCONF.
(config)# auto-config
16 (config-netconf) Configures NETCONF.
(config)# netconf
17 (config-ether-cfm) Configures the domain name and
MA.
(config)# ethernet cfm domain