Specifications

1 Reading the Manual
2
Command description format
Each command is described in the following format.
Function
Describes the purpose of the command.
Syntax
Defines the input format of the command. The format is governed by the following rules:
1. Parameters for setting values or character strings are enclosed in angle brackets
(
<>).
2. Characters that are not enclosed in angle brackets (
<>) are keywords that must be
typed exactly as they appear.
3.
{A|B} indicates that either A or B must be selected.
4. Parameters or keywords enclosed in square brackets (
[]) are optional and can be
omitted.
5. For details about the parameter input format, see Specifiable values for parameters.
Input mode
Describes the mode in which a command can be entered by using the name displayed as
the prompt.
Parameters
Describes in detail the parameters that can be set by the command. The default value and
the values that can be specified for each parameter are described.
Default behavior
If there are default values for parameters, or a default behavior when a command is not
entered, related information is provided here.
Impact on communication
If a setting has an impact on communication, such as interruptions to communication, that
impact is described here.
When the change is applied
Describes, if configuration information in memory is changed, whether the changed value is
immediately operational or whether the change takes effect only by temporarily stopping
operation, such as by restarting the Switch.
Notes
Provides cautionary information on using the command.
Related commands
Describes the commands that must be set in order to use the applicable command.