Specifications

ip source binding
238
ip source binding
Sets static for the binding database.
Syntax
To set information:
ip source binding <MAC> vlan <VLAN ID> <IP address> interface
{ gigabitethernet <IF#> | port-channel <Channel group#> } [AX2200S]
ip source binding <MAC> vlan <VLAN ID> <IP address> interface
{ fastethernet <IF#> | gigabitethernet <IF#> | port-channel <Channel
group#>
} [AX1250S] [AX1240S]
To delete information:
no ip source binding <MAC> vlan <VLAN ID> <IP address> interface
{gigabitethernet
<IF#> | port-channel <Channel group#> } [AX2200S]
no ip source binding <MAC> vlan <VLAN ID> <IP address> interface
{ fastethernet <IF#> | gigabitethernet <IF#> | port-channel <Channel
group#>
} [AX1250S] [AX1240S]
Input mode
(config)
Parameters
<MAC>
Sets the MAC address of a terminal.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
0000.0000.0000 to ffff.ffff.ffff
<VLAN ID>
Sets the ID of a VLAN to which the terminal is connected.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
See Specifiable values for parameters.
<IP address>
Sets the IP address of the terminal.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
1.0.0.0 to 126.255.255.255, 128.0.0.0 to 223.255.255.255
interface { gigabitethernet <IF#> | port-channel <Channel group#> } [AX2200S]
interface { fastethernet <IF#> | gigabitethernet <IF#> | port-channel <Channel
group#>
} [AX1250S] [AX1240S]
Sets the number of the interface to which the terminal is connected.
1. Default value when this parameter is omitted: