Specifications

ip dhcp snooping trust
235
ip dhcp snooping trust
Sets whether the interface is a trusted port or an untrusted port.
Syntax
To set information:
ip dhcp snooping trust
To delete information:
no ip dhcp snooping trust
Input mode
(config-if)
Parameters
None
Default behavior
The applicable interface operates as an untrusted port.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
On an interface on which this command is set, even if the interface is accommodated in the
VLAN where DHCP snooping is enabled, the inspection of DHCP packets is not performed.
Related commands
ip dhcp snooping