Specifications

ip arp inspection vlan
226
ip arp inspection vlan
Sets the VLAN used for dynamic ARP inspection when the DHCP snooping functionality is
enabled on a Switch.
Syntax
To set or change information:
ip arp inspection vlan { <VLAN ID list> | add <VLAN ID list> | remove <VLAN
ID list >
}
To delete information:
no ip arp inspection vlan
Input mode
(config)
Parameters
<VLAN ID list>
Sets the IDs of the VLANs used for dynamic ARP inspection.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
For details about how to set <VLAN ID list> and the specifiable values, see
Specifiable values for parameters.
add <VLAN ID list>
Adds the IDs of VLANs that will be used for the dynamic ARP inspection to the VLAN
list.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
For details about how to set <VLAN ID list> and the specifiable values, see
Specifiable values for parameters.
remove <VLAN ID list>
Removes the IDs of the VLANs used for dynamic ARP inspection from the VLAN list.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
For details about how to set <VLAN ID list> and the specifiable values, see
Specifiable values for parameters.
Default behavior
The dynamic ARP inspection functionality is not used.
Impact on communication
None