Specifications

multi-fault-detection mode
216
multi-fault-detection mode
Sets the multi-fault monitoring mode for shared link monitoring rings.
Syntax
To set information:
multi-fault-detection mode transport-only
To delete information:
no multi-fault-detection mode
Input mode
(config-axrp)
Parameters
transport-only
Transfers multi-fault monitoring frames. Multi-fault monitoring is not performed.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
None
Default behavior
None
Impact on communication
None
When the change is applied:
The change is applied immediately after setting values are changed.
Notes
None
Related commands
None