Specifications

mode
215
mode
Sets the operating mode of the Switch used for the ring.
Syntax
To set information:
mode transit
To delete information:
no mode
Input mode
(config-axrp)
Parameters
transit
Operates as a transit node.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
None
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. If you delete the mode while Ring Protocol is operating, the functionality is disabled.
As a result, a loop might occur depending on the network configuration (ring
configuration) to which the functionality is applied. To avoid a loop, before entering
this command, place the interface that is the ring port in the shutdown state.
Related commands
None