Specifications

axrp vlan-mapping
208
vlan remove <VLAN ID list>
Specifies the VLANs to be removed from the VLAN list you have configured.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
For details about how to specify <VLAN ID List> and the specifiable range of
values, see Specifiable values for parameters.
3. Handling of <VLAN ID list> after a change:
If the VLAN list is too long after the removal of VLANs, the VLAN list might be
divided into multiple lines and the configuration might be displayed as an
axrp
vlan-mapping command that consisted of multiple lines. If the VLAN list is
shorter after the removal of VLANs, an
axrp vlan-mapping command that
consisted of multiple lines might be consolidated and displayed as the
configuration.
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. You cannot specify multiple VLAN mappings for one VLAN.
2. You cannot specify a VLAN mapping for a VLAN that is used as the control VLAN.
3. You cannot specify a VLAN mapping for the multi-fault monitoring VLAN.
Related commands
vlan