Specifications

axrp vlan-mapping
207
axrp vlan-mapping
Sets the VLAN mapping to be applied to a VLAN group and also the VLANs that participate
in VLAN mapping.
Syntax
To set information:
axrp vlan-mapping <Mapping ID> vlan <VLAN ID list>
To change information:
axrp vlan-mapping <Mapping ID> {vlan <VLAN ID list> | vlan add <VLAN ID
list>
| vlan remove <VLAN ID list>}
To delete information:
no axrp vlan-mapping <Mapping ID>
Input mode
(config)
Parameters
<Mapping ID>
Specifies the VLAN mapping ID.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
1 to 128
vlan <VLAN-ID-list>
Sets the VLANs that participate in VLAN mapping. When specifying multiple VLANs,
you can specify a range.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
For details about how to specify <VLAN ID List> and the specifiable range of
values, see Specifiable values for parameters.
vlan add <VLAN ID list>
Specifies the VLANs to be added to the VLAN list you have configured.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
For details about how to specify <VLAN ID List> and the specifiable range of
values, see Specifiable values for parameters.
3. Handling of <VLAN ID list> after a change:
If the VLAN list is too long after the addition of VLANs, the VLAN list might be
divided into multiple lines and the configuration might be displayed as an
axrp
vlan-mapping command that consists of multiple lines. If the VLAN list is
shorter after the addition of VLANs, an
axrp vlan-mapping command that
consisted of multiple lines might be consolidated and displayed as the
configuration.