Specifications

axrp
206
axrp
Sets the ring ID. In addition, to set information necessary for the Ring Protocol functionality,
switches to config-axrp mode. A maximum of 4 ring IDs can be set for a Switch.
If this setting is removed, the ring information that is already set for ring IDs is deleted.
Syntax
To set information:
axrp <Ring ID>
To delete information:
no axrp <Ring ID>
Input mode
(config)
Parameters
<Ring ID>
Sets the ring ID.
The same ring ID must be specified for all switches belonging to the same ring.
Specify a unique ring ID for each different ring in a network.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
1 to 65535
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
None