Specifications

spanning-tree vlan transmission-limit
203
spanning-tree vlan transmission-limit
Sets the maximum number of BPDUs that can be sent within the PVST+ hello-time interval.
Syntax
To set or change information:
spanning-tree vlan <VLAN ID list> transmission-limit <Counts>
To delete information:
no spanning-tree vlan <VLAN ID list> transmission-limit
Input mode
(config)
Parameters
<VLAN ID list>
Starts configuration of PVST+ for the set VLAN.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
For details about how to set <VLAN ID list> and the specifiable values, see
Specifiable values for parameters.
<Counts>
Sets the maximum number of BPDUs that can be sent per
hello-time interval.
This parameter is effective only when
rapid-pvst (802.1w) is set for the
spanning-tree mode command or the spanning-tree vlan <VLAN ID list> mode
command. When
pvst (802.1D) is set for the spanning-tree mode command or the
spanning-tree vlan <VLAN ID list> mode command, the maximum number of
BPDUs that can be sent per second is 3 (fixed) and the setting value of this
command is not referenced.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
1 to 10
Default behavior
The maximum number of BPDUs that can be sent is set to 3.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None